NARDINI SZ-2000/T, SZ-2500/T Lathe Op/Part Manual

$65.00

97 in stock

Description


Number of Pages: 72

This is a reproduction, not a photocopy, of an original Nardini SZ-2000/T and SZ-2500/T Metal Lathe Instructions and Parts Manual.This manual contains all the information listed below in the contents, and should cover the following models:

SZ-2040 SZ-2040T SZ-20157 SZ-20157T SZ-2540 SZ-2540T SZ-25157 SZ-25157T

 

 

 

 

Contents:

Specifications..........................................7
Lifting and cleanlines..................................8
Foundation..............................................9
Levelling and eletrical connections....................10
Dimensions and principal assemblies....................11
Lubrication............................................12
Oil change.............................................13
Lathe controls.........................................14
Lathe operations.......................................15
Headstock instructions.................................16
Threads and feeds gear box instructions................17
Threads and feeds gear box data plate..................18
Saddle instructions....................................19
Apron instructions.....................................20
Tailstock..............................................21
Motor Driving System...................................22
Change Gears...........................................23
Threads Cutting Indicator..............................24
Spindle Adjustment.....................................25
Electrical Diagram.....................................26
Brake System...........................................27
Parts List Introduction................................28
Headstock SZ-MI-751C...................................29
Headstock SZ-MI-752C...................................30
Headstock SZ-MI-753C...................................33
Headstock SZ-MI-754C...................................34
Gear Box SZ-MI-755C ...................................36
Gear Box SZ-MI-756C....................................38
Gear Box SZ-MI-757C....................................40
Saddle SZ-MI-758C......................................42
Tool Post, Rear Tool Post and Movable Support..........44
Apron SZ-MI-778C.......................................46
Apron SZ-MI-779C.......................................48
Tailstock SZ-MI-762C...................................50
Bed SZ-MI-763C.........................................52
Change Gears SZ-MI-764C................................54
Clutch and Brake Box SZ-MI-766C........................56
Motor Drive System SZ-MI-767C..........................57
Follow RestSZ-MI-768C..................................58
Steady RestSZ-MI-769C..................................59
Micrometer Stop SZ-MI-770C.............................60
Lubrication SZ-MI-771C.................................62
Taper Attachment SZ-MI-772C............................64
Coolant Unit SZ-MI-773C................................65
Threads and Feeds Gear Box SZ-MI-774C..................66
Chip Guard SZMI-775C...................................67
Chuck Guard SZ-MI-776C.................................68
Spindle Noses SZ-M I-777C..............................69

 

Picture from inside:

 

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.

Reviews

There are no reviews yet.

Be the first to review “NARDINI SZ-2000/T, SZ-2500/T Lathe Op/Part Manual”

Your email address will not be published. Required fields are marked *

Print Page