NARDINI ND-1500 1700 S/E Series Metal Lathes Owner Instruction Parts Manual

$65.00

SKU: 0484 Categories: , , , Tag:

Description

Number of Pages: 69

This is a reproduction, not a photocopy, of an original Nardini ND-1500S, ND-1500E, ND-1700S, and ND-1700E Instructions and Parts Manual. This manual contains all the information below in the contents, and all the parts diagrams are show in exploded view form.

Contents:

Specifications…………………………………………………………………………………. 5
Lifting and Cleanliness……………………………………………………………………… 6
Foundation……………………………………………………………………………………. 7
Levelling and Electrical Connections…………………………………………………… 8
Dimensions and Principal Assemblies………………………………………………….. 9
Lubrication…………………………………………………………………………………….. 10
Oil Change…………………………………………………………………………………….. 11
Lathe Controls……………………………………………………………………………….. 12
Lathe Operation……………………………………………………………………………… 13
Headstock instructions…………………………………………………………………….. 14
Threads and Feeds Gear Box Instructions……………………………………………. 15
Threads and Feeds Gear Box Data Plate…………………………………………….. 16
Saddle Instructions………………………………………………………………………….. 17
Apron Instructions…………………………………………………………………………… 18
Tailstock Instructions……………………………………………………………………….. 19
Motor Drive System Instructions……………………………………………………….. 20
Change Gear and Safety Coupling Instructions……………………………………… 21
Threads Cutting Indicator Instructions (leadscrew 4 T.P.I.)…………………….. 22
Threads Cutting Indicator Instructions (leadscrew 6mm)…………………………. 23
Electrical Diagram…………………………………………………………………………… 24
Spindle and Leadscrew Axle adjustment……………………………………………… 26
Parts List Introduction……………………………………………………………………… 27
Headstock ND-MI-501A………………………………………………………………… 28
Headstock ND-MI-502A ……………………………………………………………….. 30
Headstock ND-MI-503A………………………………………………………………… 32
Threads and Feeds Gear Box ND-MI-504A……………………………………….. 34
Threads and Feeds Gear Box ND-MI-505A……………………………………….. 36
Threads and Feeds Gear Box ND-MI-506…………………………………………. 38
Saddle ND-MI-507A……………………………………………………………………… 40
Tool Post, Rear Toolpost and Movable Support…………………………………… 42
Apron ND-MI-509A………………………………………………………………………. 44
Apron ND-MI-510A………………………………………………………………………. 46
Tailstock ND-MI-511A…………………………………………………………………… 48
Bed ND-MI-512A…………………………………………………………………………. 50
Change Gears ND-MI-513A……………………………………………………………. 52
Change Gears ND-MI-513B……………………………………………………………. 54
Motor Drive System ND-MI-514A…………………………………………………… 56
Micrometer Stop ND-MI-515A……………………………………………………….. 57
Follow Rest ND-MI-516A………………………………………………………………. 58
Steady Rest ND-MI-517A………………………………………………………………. 59
Taper Attachment ND-MI-518A………………………………………………………. 60
Coolant Unit ND-MI-519………………………………………………………………… 62
Threads Cutting Indicator (leadscrew 4 T.P.I.)ND-MI-520……………………. 63
Stead Rest ND-MI-521…………………………………………………………………… 64
Chip Guard ND-MI-522…………………………………………………………………. 65
Drive Plate, Universal Chuck Flange and Back Plate ND-MI-523…………… 66
Chuck Guard ND-MI-524……………………………………………………………….. 68
Threads Cutting Indicator (leadscrew 6mm) ND-MI-525………………………. 69

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.