Description
Number of Pages: 22
This is a reproduction, not a photocopy, of an original Bullard Universal Horizontal Boring Drilling & Milling Machine with a 4-inch or 5-inch Spindle Operations and Maintenance Manual. This manual contains information on lifting, installation, leveling, reassembling, and building a foundation for these machines. The manual has proper operating procedures and a lubrication chart with information about proper oiling. This Bullard manual has lots of information about maintenance and various adjustments to the gibs, removing and replacing the rear post and gearboxes. There are sections on how to adjust the different clutches, like the rapid traverse clutch. Sections on adjusting various bearings, like the spindle bearings, and more. Please see the complete index pictured.
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear, which can be better than a low-resolution free pdf download.
