Description
Number of Pages: 34
This is a reproduction, not a photocopy, of an original JET Wood Spindle Shaper Instructions and Parts Manual. This manual contains general safety instructions, operation instructions, assembly instructions, adjustments, maintenance, lubrication, and a complete set of exploded view diagrams of the parts with description. Please read index below.
Specifications
Spindle:
Diameter 3/4″ (19.5), 1″ (25.4), 1-1/4, 30, 35, 40mm.
Vertical Stroke 3-1/8″ (80mm).
Five Speeds: 3000, 4000, 6000, 8000, 10000 rpm.
Table Inserts SS-511:227mm, 0160mm. SS-512: 0262mm, 0160mm.
Inserts Opening Motor 0160mm, 080mm.
5HP 3PH Motor
3HP 1PH or3PH Motor
Collets (Optional) 1/2″, 3/8″, 5/8″, 12mm, 16mm.
Max. Diameter Of Cutters Can Be Used For SS-511 210mm (8-3/8″).
Max. Diameter Of Cutters Can Be Used For SS-512 260mm (10-1/4″).
Dust Hood 4″.
Table Size For SS-511 700x900mm (27-1/2″x35-3/8″).
Table Size For SS-512 800x1000mm (31 -1/2″x39-3/8″).
Fence Size For SS-511 900x120mm.
Fence Size For Ss-512 1000x146mm.
Machine Size
SS-511T, TS 900x850x1170mm.
SS-511M, MS 900x750x1170mm.
SS-512T, TS 1000x900x1170mm.
SS-512M, MS 1000x820x1170mm.
Packing Size
SS-511T, TS 1090x900x1020mm.
SS-511M, MS 1090x790x1020mm.
SS-512T, TS, M, MS 1160x940x1020mm.
Net Weight
SS-511 310kg.
SS-512 410kg.
Gross Weight
SS-511 370kg.
SS-512 530kg.
Index
Specifications……………………………..2
Features Of Your Shaper……………………..3
Important Safety Instructions………………..4
General Safety Rules………………………..4
Additional Safety Rules For The Wood Shaper……5
Unpacking And Cleanup……………………….7
Installation Requirements……………………8
Installation And Levelling…………………..8
Grounding Information And Power Connections……8
Electrical Controls…………………………9
Adjustment And Operating Your Shaper…………10
Speed Change And Belt Adjustment…………….10
Spindle Installation And Replacement…………11
Spindle Tilting, Raising And Lowering
Adjustment………………………………..12
Shaper Cutterhead Installation………………13
Table Inserts……………………………..14
Assembling And Installing Shaper Fence
And Dust Hood……………………………..14
Operating Controls For The Fence…………….15
Work Hold-Down Guides Adjustment…………….15
Sliding Table Adjustment……………………16
Operation…………………………………17
Shaping When Using The Fence As A Guide………16
Position Of Collars………………………..17
Lubrication Guide Of Your Shaper…………….20
Periodical Maintenance……………………..20
Trouble Shooting……………………..21,22,23
Parts Breakdowns And Parts List…………..24-29
Wiring Diagram…………………………….30
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.