CINCINNATI M-Type Miller 1M & 2M Horizontal Milling Machines Operator Manual

$45.00

94 in stock

Description

Number of Pages: 31

This is a reproduction of an original Cincinnati M-Type Millers Operator’s Instructions Manual. This manual covers both the 1M and 2M horizontal milling machines. This manual covers the proper operating procedures, adjustments, and maintenance. It contains cross-sectional diagrams of the spindle and the dividing head. It also covers the set up and operational instructions for the dividing head. See contents below.
Contents:
MACHINE SPECIFICATIONS……………………………………………3
LUBRICATION
General Instructions……………………………………………..4 Chart…………………………………………………………..5 Specifications…………………………………………………..6
OPERATING INSTRUCTIONS
Starting the Machine……………………………………………..6
Changing Spindle Speeds…………………………………………..7
Changing Feeds…………………………………………………..7 Feeds…………………………………………………………..7
Power Table Feed…………………………………………………7
Power Cross Feed…………………………………………………7
Power Vertical Feed………………………………………………8
Power Quick Traverse……………………………………………..8
SETTING UP THE MACHINE
Setting Up the Fixture and Cutters…………………………………9
Overarm, Supports, and Braces……………………………………..9
Clamping Devices for Sliding Units………………………………..11
Trip Dogs………………………………………………………11
Reversing the Direction of Rotation of the Spindle………………….11
Changing from Cast Iron to Steel………………………………….11
ADJUSTMENTS
Adjusting the Gibs………………………………………………12
Increasing the Driving Power of the Clutch…………………………12
Adjusting the Lead Screw Bearings…………………………………12
Adjusting the Spindle Bearings……………………………………13
Adjusting the Cross Screw Bearings………………………………..13
Adjusting the Driving Chain………………………………………14
DIVIDING HEAD
Setting Up the Dividing Head and Change Gears………………………15
How to Set the Index Plate……………………………………….15
How to Calculate Indexing………………………………………..16
Indexing with the Front Plate…………………………………….17
Indexing 2 to 400,000 with new wide Range Divider…………………..18
Clamping the Spindle in Place…………………………………….19
Adjusting the Worm………………………………………………19
TABLES
Standard Index Tables……………………………………………20
High Number Index Tables…………………………………………21
Leads, Angles, and Change Gears for Spiral End Mills………………..23
Leads, Angles, and Change Gears for Spiral Milling Cutters…………..23
Change Gears, Angles, and Leads for Cutting Spirals…………………24
Table of Leads………………………………………………….26
CALCULATING MACHINING TIME……………………………………….30
Overview
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page,and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear; they are then comb bound with heavy cover pages so they lie flat on the workbench.

Reviews

There are no reviews yet.

Be the first to review “CINCINNATI M-Type Miller 1M & 2M Horizontal Milling Machines Operator Manual”

Your email address will not be published. Required fields are marked *

Print Page