Description
Number of Pages: 65
This is a reproduction, not a photocopy, of an original Nardini MS-1440S/E, MS-1640S/E Mascote Series Metal Lathes Instructions and Parts Manual. This manual covers a whole series of different Nardini lathe models. This manual contains all of the information listed below.
Contents:
Technical characteristics……………………………………………………………………… | 5 |
Special care with the lathe…………………………………………………………………… | 6 |
Safety advices………………………………………………………………………………….. | 7 |
Lifting and cleanliness…………………………………………………………………………. | 8 |
Foundation plan………………………………………………………………………………… | 9 |
Levelness and electric conection…………………………………………………………… | 10 |
Dimensions and peincipal assemblies…………………………………………………….. | 11 |
Lubrication………………………………………………………………………………………. | 12 |
Oil change……………………………………………………………………………………….. | 13 |
Lathe’s controls………………………………………………………………………………… | 14 |
Lathe’s operation………………………………………………………………………………. | 15 |
Headstock’s instructions……………………………………………………………………… | 16 |
Gear box instructions…………………………………………………………………………. | 17 |
Gear box data plate…………………………………………………………………………… | 18 |
Saddle’s instructions…………………………………………………………………………… | 19 |
Apron’s instructions…………………………………………………………………………… | 20 |
Tailstock’s instructions……………………………………………………………………….. | 21 |
Motor driving system instructions…………………………………………………………. | 22 |
Safety coupling and change gears instructions…………………………………………. | 23 |
Thread chasing dial……………………………………………………………………………. | 24 |
Adjustment of the leadscrew axle and spindle adjustment………………………….. | 25 |
How to mount and dismount the spindle………………………………………………… | 26 |
Table of the possible troubles with the lathe……………………………………………. | 27 |
Wiring diagram to models MS-1440S and MS-1640S…………………………….. | 28 |
Description of the electrical components and restitution orders…………………… | 29 |
Wiring diagram to models MS-1440E and MS-1640E…………………………….. | 30 |
Description of the electrical components and restitution orders…………………… | 31 |
Spare parts list………………………………………………………………………………….. | 33 |
Headstock MS – Ml – 401………………………………………………………………….. | 34 |
Headstock MS – MI – 402…………………………………………………………………. | 36 |
Headstock MS – MI – 403…………………………………………………………………. | 38 |
Gear box MS – MI – 404…………………………………………………………………… | 40 |
Gear box MS – Ml – 405……………………………………………………………………. | 42 |
Gear box MS – MI – 406…………………………………………………………………… | 44 |
Saddle MS – Ml – 407……………………………………………………………………….. | 46 |
Saddle accessories MS – Ml – 408………………………………………………………. | 48 |
Apron MS – Ml – 409………………………………………………………………………… | 50 |
Apron MS – Ml – 49.50………………………………………………………………………… | 52 |
Tailstock MS – Ml – 411…………………………………………………………………….. | 54 |
Bed MS – Ml – 412…………………………………………………………………………… | 56 |
Change gears MS – Ml – 413………………………………………………………………. | 58 |
Motor driving system MS – Ml – 414……………………………………………………. | 60 |
Steadies MS – Ml – 415……………………………………………………………………… | 61 |
Four jaw chuck, drivingplate and universal chuck flange MS – Ml – 416………. | 62 |
Taper turner MS – Ml – 417………………………………………………………………… | 64 |
Coolant unit and threads cutting indicator MS – Ml – 418………………………….. | 66 |
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.