Description
Number of Pages: 44 + 4 foldouts
This is a reproduction, not a photocopy, of an original Japanese Wasino LEO (G) – 80A: 100A: 125A: 150A models instructions service manual. This manual contains information on the different lathe specifications, lifting and installation instructions. It has the wiring diagrams for 220V or 440V, and it even had information on the correct setting for the thermal relays. The manual has good information on operating the lathe and lubricating instructions. The manual explains how to service and adjust various parts of the lathe like the spindle bearings, safety clutches, etc… The manual also has a section on how to setup for threading with feed and thread charts. This manual was copied on blueprint paper, and was fading heavily. We were able to restore it and made it clear to read.
Overview
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear; they are then comb bound with heavy cover pages so they lie flat on the workbench, which is better than a low resolution pdf download.
