Description
Number of Pages: 60
This is a reproduction, not a photocopy, of an original Lodge & Shipley 1610, 2013, and 2013-17 Lathe Repair Parts Manual. This manual contains parts list and exploded view diagrams. Check the contents below.
We have the operators manual for these Lodge & Shipley Powerturn lathes listed here:
Lodge & Shipley Powerturn 1610, 2013-17 Metal Lathe Owner Operator Instructions Service Manual
Contents:
| Headstock, Covers and Cut Speed Indicator……………………………………………… | 1 |
| Headstock – Shifter Controls…………………………………………………………………… | 3 |
| Headstock – Shifter Levers and Lubrication……………………………………………….. | 5 |
| Headstock – Oil Reservoir and Clutch Shifter Linkage…………………………………. | 7 |
| Headstock – Clutch Shaft “A”, Sliding Gear Shaft “C”, | |
| Cluster Gear Shaft “D”……………………………………………………………………. | 9 |
| Headstock – Sliding Clutch and Back Gear Shafts “E”, | |
| Low Speed Shaft “F”, Intermediate Gear Shaft “H”………………………………. | 11 |
| Headstock – Spindle “G”, Leadscrew Reverse Gear Shaft “I”, | |
| Leadscrew Reverse Clutch Gear Shaft “J”…………………………………………… | 13 |
| Quick Change Gear Box, Cover and Shifter Levers…………………………………….. | 15 |
| Quick Change Gear Box – End Housing and Sliding Tumbler Shaft “O”…………… | 17 |
| Quick Change Gear Box – Lubrication; Clutch Gear Shaft “L”; | |
| Change Gear Shaft “M”…………………………………………………………………… | 19 |
| Quick Change Gearing and Quadrant……………………………………………………….. | 21 |
| Carriage, Micrometer Ball Stop, Direct Reading Cross Feed Dial, Dual | |
| Direct Reading Cross Feed Dials……………………………………………………… | 23 |
| Carriage – Lubrication……………………………………………………………………………. | 25 |
| Compound Rest……………………………………………………………………………………. | 27 |
| Apron (Std.), Feed Reverse Lever and Lubrication……………………………………… | 29 |
| Apron, (Four Way Rapid Traverse), Feed Reverse Lever and Lubrication………. | 31 |
| Apron (Four Way Rapid Traverse) – Shifter Levers and Barr………………………… | 33 |
| Apron – Pinion Shaft and Dial and Counter Direct Reading Length | |
| Attachment………………………………………………………………………………… | 35 |
| Apron (Std. and Four Way Rapid Traverse) – Gearing and Control Levers …….. | 37 |
| Tailstock, Spindle and Handwheel……………………………………………………………. | 39 |
| Tailstock – Top, Base and Clamps……………………………………………………………. | 41 |
| Bed, Legs and Pan………………………………………………………………………………… | 43 |
| Leadscrew, Feed Rod and Stop Dogs………………………………………………………. | 45 |
| Apron Drive – Four Way Rapid Traverse………………………………………………….. | 47 |
| Leadscrew and Feed Rod Support; Apron Control, Reverse to Leadscrew……… | 49 |
| Multiple Length Stops and Start and Stop Levers………………………………………… | 51 |
| Vee Belt Motor Drive and Covers……………………………………………………………. | 53 |
| Coolant – Pump, Piping and Tubing………………………………………………………….. | 55 |
| Taper Attachment and Locking Arm…………………………………………………………. | 57 |
| Steady Rest, Connected Rear Rest, Follow Rest and Micrometer | |
| Carriage Stop…………………………………………………………………………….. | 59 |
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.
