Description
Number of Pages: 23
This is a reproduction, not a photocopy, of an original JET GH-1340W and GH-1440W metal lathes owner’s manual. This manual covers stock Nos. 321810, 321820, 321830, and 321840. We also have the JET parts manuals for these metal lathes as well.
This manual contains on operating instructions and how to set the speeds and feedrates. It covers how to lubricate it with the correct oil. It also contains instructions on how to make adjustments to tune the lathe, and threading information, set up, and charts.
PDF Download is Available
The manual has the option for either a PDF Download or a quality Printed copy with card stock covers and a comb binding. After purchase an email will be sent with link to download the PDF. The PDF will not be password protected, but it will have your contact information watermarked at the bottom of the file. We are beginning to add this service on our newer manuals only.
|
The manual above may help you operate and maintain your metal lathe. If you would like to learn more about metal lathework techniques, the names and proper uses of different lathe tools, and other lathe operations, I would recommend clicking on the pictures of these two books here. We also have a complete series of different machinist books on sharpening, gearmaking, milling machines, and more here: Workshop Machinist Series |
|
|
|---|
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.
