Description
Number of Pages: 27
This is a reproduction, not a photocopy, of an original Rockwell/Delta 12″ Radial Saw “Plus 10” Instruction and Parts Manual. This radial arm saw manual covers how to install and set up this machine for use. The manual includes instructions on how to properly adjust and level the track-arm, and installing the cuttinghead to the track-arm.
The Rockwell manual covers how to correctly install the table boards and level the saw, and how to adjust and square the blade with the table. It also has instructions on adjusting the ball bearings against the track, and adjusting the saw travel square with the fence. It has wiring diagrams 24 volt single and double phase magnetic control.
The radial arm saw manual contains explosive view parts diagrams with list and parts descriptions for models 33-790, 33-791, 33-792, 33-793, and the old style “Plus 10” Rockwell Delta radial arm saws.
If your machine looks similar to the one pictured, this manual should cover your machine.
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.
