Description
Number of Pages: 37
This is a reproduction, not a photocopy, of an original LeBlond Metal Lathes Service Manual. This manual covers eight different models:
25″ and 32″ Heavy Duty Engine Lathes
25″ and 32″ Plain Gap Bed Lathes
25″/50″ and 32″/60″ Sliding Gap Bed Lathes
27″ and 30″ Hollow Spindle Lathes
It contains information on installation, maintenance, lubrication, operating instructions, power-rapid traverse and cross sectional diagrams of the parts. Please read contents below pictures.
Contents:
Adjustments:
Carriage……………………………11
Clutch and Brake………………….12-15
Leadscrew…………………………..11
Spindle ……………………………11
Apron, Operation …………………….8
Bed Ways, Flame Hardened Steel………..16
Carriage Adjustment …………………11
Chasing, Thread Data………………10-11
Clutch and Brake………………….12-15
Feed Box, Operation ………………….8
Gap Bed Lathes, Plain………………..19
Gap Bed Lathes, Sliding……………18-19
General Instructions………………….6
Headstock, Operation………………….7
Hollow Spindle Lathes………………3-17
Leadscrew Adjustment…………………11
Leveling ……………………………5
Lubrication …………………………6
Operation:
Apron ………………………………8
Feed Box…………………………….8
Headstock …………………………..7
Spindle Nose…………………………9
Tailstock……………………………9
Power Rapid Traverse…………………21
Preliminary Procedure ………………..4
Re-leveling………………………….5
Repair Parts……………………..22-36
Spindle Adjustment…………………..11
Spindle Nose…………………………9
Taper Attachment…………………….20
Thread Chasing Data……………….10-11
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.
