KEMPSMITH Universal Dividing Head 10 1/2 & 13 1/4 Instructions & Parts Manual

Description

Number of Pages: 34, printed 5.5″ x 8.5″

This is a reproduction, not a photocopy, of an original Kempsmith Machine Co. 10 1/2″ and 13 1/4″ Universal Dividing Heads Construction and Use Instructions and Parts Manual. This manual contains information about the specifications and diagrams of the parts for these dividing heads. It also explains how to properly test the accuracy of the worm wheel.

The manual goes into details about how to set up for indexing with index table of divisions. It shows how to set up the Kempsmith heads for use of spiral milling, angle spiral milling, bevel gear cutting, using the side-center tailstock, and hobbing worm wheels. The manual contains information about cutting large spur gears with the dividing head and cutting spiral with an end mill.

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.