KEARNEY & TRECKER Milwaukee Lead Attachments Operators Manual

$45.00

Description

Number of Pages: 45

This is a reproduction, not a photocopy, of an original Kearney & Trecker Milwaukee Table of Lead and Indexing Divisions for Model K Universal Dividing Head and Conventional and Low Lead Attachments with US standard lead screw. This manual contains operating instructions and all the lead charts for these attachments. Please see index below.

 

 

 

Index
I     INTRODUCTION...................................4
II    MODEL K UNIVERSAL SPIRAL DIVIDING HEAD
      Spindle........................................4
      Index Crank and Plunger........................5
      Hand Drive.....................................5
      Tail Stock.....................................5
      Steady Rest....................................5
      Right Angle Drive Bracket......................5
      Index Plates...................................5
      Lubrication....................................6
      Astronomical Divider...........................6
III   CONVENTIONAL LEAD ATTACHMENT...................6
IV    LOW LEAD ATTACHMENT............................8
FIGURE
1.    Model K Universal Spiral Dividing Head and
      Conventional Lead Attachment...................3
2.    Model K Universal Spiral Dividing Head and
      Low Lead Attachment............................3
3.    Schematic Drawing..............................4
4.    Right Angle Drive Bracket......................5
5.    Astronomical Divider...........................6
6.    Gearing in Conventional Lead Attachment........7
7.    Idler Gears in Conventional Lead Attachment....7
8.    Mounting Low Lead Attachment...................8
9.    Gearing in Low Lead Attachment.................8
TABLE
1.    Plain Indexing - Model K Universal Spiral
      Dividing Head Using Standard or High
      Number Index Plates........................10-13
2.    Leads - Conventional Lead Attachment.......14-23
3.    Leads - Low Lead Attachment................24-39
4.    Thread Milling.............................40-44

 

 

 

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.