HARDINGE HC & HCT Chucking Lathe Maintenance Manual

$35.00

87 in stock

Description

Number of Pages: 40

This is a reproduction, not a photocopy, of an original Hardinge Model HC & HCT Chucking Machine Maintenance Manual. This manual contains maintenance, and lubrication. Please see the contents below.

Index

Belts—Adjustment……………………………………..3
Replacement………………………………………….3
Brake, Spindle……………………………………….5
Adjustment…………………………………………..5
Insert Replacement……………………………………5
Solenoid Replacement………………………………….5
Spring Replacement……………………………………6
Carriage—Clutch and Gearbox Lubrication………………..24
Disassembly…………………………………………26
Gib Adjustment………………………………………24
Handwheel Disassembly………………………………..35
Lock Removal………………………………………..26
Lubrication………………………………………24,34
Rack Removal………………………………………..33
Reassembly………………………………………….31
Collet Closer—Removal………………………………..36
Replacement…………………………………………36
Coolant Facilities…………………………………..37
Cross Feed Screw and Dial—Removal……………………..32
Replacement…………………………………………33
Drive—Brake Adjustment……………………………….12
Cartridge—Removal……………………………………10
Disassembly…………………………………………10
Replacement…………………………………………11
Feed Screw Nut—Removal……………………………….11
Replacement…………………………………………12
Lubrication………………………………………….6
Micro Switch………………………………………..12
Pulleys and Shaft Assembly Removal…………………….14
Speed Change Mechanism—Removal…………………………6
Replacement………………………………………….8
Speed Change Motor, Brake and Vertical Screw Disassembly….6
Speed Change Motor Disassembly…………………………9
Electrics—Main Switch Case……………………………38
Power Feed Control Panel……………………………..17
Variable Speed Control Panel………………………….12
Headstock—Removal……………………………………36
Replacement…………………………………………37
Lubricants and Sealer………………………………..39
Maintenance, Preventive……………………………….2
Power Feed—Control Panel……………………………..17
Drive………………………………………………15
Lubrication…………………………………………14
Spindle—Limit Switch…………………………………36
Lock Pin……………………………………………36
Lubrication…………………………………………36
Turret and Cross Slide……………………………….18
Removal…………………………………………….18
Replacement…………………………………………18
Disassembly…………………………………………19
Feed Screw Nut—Removal……………………………….24
Replacement…………………………………………24
Adjustment………………………………………….24
Gib Adjustment………………………………………19
Index Lever and Lock—Disassembly………………………21
Reassembly………………………………………….23

 

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.

Reviews

There are no reviews yet.

Be the first to review “HARDINGE HC & HCT Chucking Lathe Maintenance Manual”

Your email address will not be published. Required fields are marked *

Print Page