Delta Wood Shaper RS-15 Owners Instruction Service & Parts Manual

Description

Number of Pages: 24

A dependable shop reference for anyone who owns or works on a Delta Model RS-15 Shaper. This quality reproduction combines the original factory instructions with the illustrated parts breakdown in one convenient book. The pages have been carefully cleaned and prepared for easy use at the workbench.

What’s in this manual:

• Machine Assembly & Initial Setup — Walks through initial machine setup, including the spindle handwheel and the fence assembly, so the major components can be installed and aligned correctly.
• Spindles, Table Inserts & Guarding — Explains how to install or change the applicable spindle, set the table inserts flush, and assemble the guard hardware for the spindle configuration shown in the manual.
• Speed, Belt Tension & Spindle Controls — Covers raising and lowering the spindle, selecting the available pulley speeds, setting drive-belt tension, and safely changing spindle rotation when equipped.
• Collar & Starting-Pin Shaping — Uses practical illustrations to explain collar placement and the starting-pin sequence for beginning and controlling collar-guided shaping cuts.
• Electrical Connections & Motor-Starter Diagrams — Provides single- and three-phase connection guidance together with component, wiring, and schematic information for the single-phase LVC magnetic motor starter.
• Exploded Views & Replacement Parts — Includes numbered exploded views and matching replacement-parts lists to help identify assemblies and locate the correct service parts.

Contents:

SAFETY RULES FOR ALL TOOLS.............................................2
IMPORTANT..............................................................2
MANUAL BEFORE OPERATING THE TOOL.......................................2
MAINTAIN TOOLS IN TOP CONDITION........................................2
USE RECOMMENDED ACCESSORIES............................................2
TURN POWER OFF.........................................................2
  ADDITIONAL SAFETY RULES FOR WOOD SHAPERS.............................3
UNPACKING AND CLEANING.................................................3
ELECTRICAL CONNECTIONS.................................................3
BEARING SURFACE FIG....................................................3
CHANGING VOLTAGE ON THE THREE PHASE MACHINE............................3
SPINDLE LOCK...........................................................6
INSTALLING SPINDLES....................................................6
REMOVING SPINDLES......................................................7
ASSEMBLING FENCE AND GUARD.............................................8
FENCE OPERATION.......................................................11
START/STOP SWITCH.....................................................11
SPINDLE BRAKE.........................................................11
SPINDLE SPEEDS AND CHANGING...........................................12
ADJUSTING BELT TENSION................................................12
MITER GAGE AND STOP RODS..............................................13
UPERATION.............................................................14
SHAPING WITH COLLARS..................................................14
  POSITION OF COLLARS.................................................15
ACCESSORIES...........................................................15
SAFETY CUTTERHEAD AND.................................................15
PARTS BREAKDOWN & WIRING DIAGRAM...................................19-24

Overview:

A clean manual is essential for dialing in your machine, but hard to find. Unlike low-resolution free PDF downloads, we professionally digitally restore every page—erasing stains, hole punches, tears, and handwriting. While constrained by the factory original, we maximize clarity so our manuals often look better than new. Printed on quality white paper and comb-bound to lay completely flat at the machine, we deliver a durable, vital tool backed by 30 years of shop expertise.