Delta 16″ Scroll Saw 40-530 Owners Instruction Service & Parts Manual

Description

Number of Pages: 17

A dependable shop reference for anyone who owns or works on a Delta Model 40-530 16″ Scroll Saw. This quality reproduction combines the original factory instructions with two illustrated parts breakdowns in one convenient book. The pages have been carefully cleaned and prepared for easy use at the workbench.

What’s in this manual:

• Changing Blades — Step-by-step instructions for removing and installing blades with the quickset blade-changing wrench on both the upper and lower blade holders, with illustrated steps with the blade teeth facing the correct direction.
• Adjusting Blade Tension — How to set and check blade tension: how the tension lever works in its vertical and horizontal positions; guidance for finer and thicker blades; Delta’s pluck-the-blade test for listening for a high-pitched tone.
• Wiring Diagram — Complete wiring diagrams are printed on both parts sheets identifying switch (1343759), motor (1348716), and capacitor (1348719), including the printed wire colors.
• Exploded View & Replacement Parts List — A numbered exploded view with a matching replacement-parts list, part numbers, and descriptions, numbered through reference 93; the later list flags T1 and T2 part variations. The parts diagrams explicitly cover Delta model 40-530.
• Tilting & Leveling the Table — Table-tilting and alignment instructions for bevel work up to 45 degrees left, including squaring the table to the blade and resetting the pointer to zero.
• Inside Cutting — How to release the upper blade, thread it through a hole in the workpiece, and reconnect it for inside cuts.
• Adjusting the Holddown & Dust Blower — Setting the spring holddown for the work being cut and connecting the blower hose to the air nozzle.
• Lubrication — The lubrication service procedure recommended after each 20 hours of use, including removal of the four screws and side panel, the pivot bolts and wavy washers, cleaning the shafts, and re-oiling them.
• Power & Grounding — Power information (115 volt), including the warning not to convert the motor to 230 volts; it also includes grounding instructions and an extension-cord gauge chart.

Contents:

PARTS, SERVICE OR WARRANTY ASSISTANCE..................................2
SAFETY RULES...........................................................3
MANUAL BEFORE OPERATING THE TOOL.......................................3
POWER OFF..............................................................3
ADDITIONAL SAFETY RULES FOR SCROLL SAWS................................4
UNPACKING AND CLEANING.................................................5
ASSEMBLY INSTRUCTIONS..................................................6
REPLACING BLADE........................................................6
EXTENSION CORDS........................................................7
CONNECTING SCROLL SAW TO POWER SOURCE..................................8
  GROUNDING INSTRUCTIONS...............................................8
CONVERTED TO OPERATE AT 230 VOLTS......................................8
FROM ELECTRIC SHOCK....................................................8
  ON-OFF SWITCH........................................................9
  LOCKING SWITCH IN THE “OFF” POSITION.................................9
  WRENCH AND BLADE STORAGE.............................................9
ADJUSTING BLADE TENSION...............................................10
TILTING THE TABLE.....................................................11
THE BLADE.............................................................11
LEVELING THE TABLE....................................................12
DUST BLOWER...........................................................12
ADJUSTING HOLDDOWN....................................................12
LUBRICATION...........................................................13
EXPLODED VIEW & REPLACEMENT PARTS - SECTION 1......................14-15
EXPLODED VIEW & REPLACEMENT PARTS - SECTION 2......................16-17
PARTS DIAGRAM MODELS: 40-530

Overview:

A clean manual is essential for dialing in your machine, but hard to find. Unlike low-resolution free PDF downloads, we professionally digitally restore every page—erasing stains, hole punches, tears, and handwriting. While constrained by the factory original, we maximize clarity so our manuals often look better than new. Printed on quality white paper and comb-bound to lay completely flat at the machine, we deliver a durable, vital tool backed by 30 years of shop expertise.