Description
Number of Pages: 30
This is a reproduction, not a photocopy, of an original Clausing Horizontal Milling Machine Operating Instructions and Parts List Manual for models 8540, 8541, 8550, and 8551. This manual contains information on setup, lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments.
Contents
INSTALLATION
Dimension Drawing………………………………….2
Foundation………………………………………..3
Cleaning………………………………………….3
Moving and Lifting…………………………………3
Electrical Connections……………………………..3
Anchoring……………………………………….4.1
Leveling………………………………………..4.1
LUBRICATION
Lubrication Chart………………………………….5
OPERATION
Functional Diagram…………………………………6
Drive Controls…………………………………….7
Spindle Speeds…………………………………….7
Motor Control……………………………………..7
Table, Saddle and Knee Controls……………………..8
Power Longitudinal Feed Models………………………8
Mounting Cutter Arbor………………………………9
MAINTENANCE AND ADJUSTMENTS
Preventive Maintenance……………………………..9
Adjusting Gib……………………………………..9
Tensioning Power Feed Belts………………………10.1
Tensioning Spindle Belts…………………………10.1
Adjusting Variable Belts…………………………10.1
Replacing Variable Belts…………………….10.1 & 11
Replacing Power Feed Belts……………………….12.1
Adjusting Spindle Bearings……………………….12.1
Lower Variable Control Cylinder…………….12.1 & 13.1
Upper Variable Control Cylinder…………………..13.1
PARTS INDEX & INSTRUCTIONS FOR ORDERING PARTS……14.4-29
ATTACHMENTS………………………………………30
TABLES……………………………………………i
Overview
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page,and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear; they are then comb bound with heavy cover pages so they lie flat on the workbench.
