Description
Number of Pages: 43
This is a reproduction, not a photocopy, of an original Schaublin No. 70 Series Precision Metal Lathes Technical Specifications Catalog. This catalog is really nice if you have one of these lathes, because it covers all the different options and accessories for this series of lathes. It includes the specifications and images of the different types of tables, cabinets, headstocks, chucks, cross-slides, carriages, tailstocks, turrets, etc… See contents below.
I originally purchased this catalog to get ideas and designs for ornamental turning. These lathes were taken after the design of older ornamental machines, and then modernized. The attachments and set up configurations would be beneficial for anyone doing research in ornamental turning, watch making, jewelry making, or any fine precision work.
We also have a manual for the Schaublin TO 70-80 Version No. 4 Toolmaker’s Lathe as well.
Contents:
Introduction……………………………………………….3
General remarks…………………………………………….4
Various versions of toolmaker’s lathe (TO 70)………………….5
Various versions of second-operation lathe (TL 70)……………..6
Various versions of turret lathe (TR 70)………………………7
Specification of SCHAUBLIN 70 lathes………………………….8
Overall dimensions for SCHAUBLIN 70 lathes…………………….9
The SCHAUBLIN 70-80 base and its many accessories…………..10-11
Range of spindle speeds for base-mounted lathes (70-80)………..11
Beds for base and bench and their accessories…………………12
Individual drives and accessories (for bench-mounted lathes)……13
Headstocks, types W and F………………………………..14-15
Accessories for fitting on the headstocks………………….16-17
Accessories for fitting in the spindle
centres for headstocks-collets-drill chuck and arbor for same….18
internal-gripping collets-expanding arbors…………………..19
arbors with interchangeable expanding bushes…………………19
external-gripping collets – 6-jaw chucks on type W arbors…..20-21
reduction bushvarious arbors-adjustable stops with extractor….22
Accessories for fixing on the spindle……………………..23-24
Screw- or lever-operated carriages…………………………..25
Accessories for screw- or lever-operated carriages
tool holders – adjustable rear support – tools……………….26
adjusting screws for slides levers and stops for slides……..27
quick-clamping tool holders……………………………..28-29
milling attachment and its accessories……………………30-31
grinding attachments………………………………………32
Turret carriage……………………………………………33
Accessories for turret carriage…………………………..34-36
Cutting-off carriages………………………………………37
Various carriages………………………………………….38
Tailstocks………………………………………………..39
Accessories for tailstocks……………………………….40-41
Accessories for beds……………………………………….42
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.
