Description
Number of Pages: 35
This is a reproduction, not a photocopy, of an original Clausing/Colchester 13″ x 24″ and 13″ x 36″ Heavy Duty Geared Precision Lathes Instructions and Parts Manual, 1st edition. This manual contains operation instructions, adjustments, maintenance, lubrication, and a complete pictorial view of the parts with descriptions as shown above. Please see index below.
Contents:
GENERAL DESCRIPTION
Headstock………………………..3
Master Quick Change Feed Box……….7
Dominion Quick Change Feed Box……..9
Saddle………………………….11
Apron…………………………..11
Tailstock……………………….12
Motor Drive……………………..12
Coolant Unit…………………….12
Lathe Bed……………………….13
Standard Equipment……………….14
Extra Equipment………………….14
Square Tool post…………………14
Backplates………………………14
Stationary Steady………………..15
Collet Attachment………………..15
Chucks………………………….15
Taper Turning Attachment………….15
INSTALLATION
Main Dimensions………………….16
Installation and Location…………17
Cleaning………………………..17
Levelling……………………….17
Turning Tests……………………17
Lubrication……………………..19
Wiring………………………….19
SPARE PARTS
Headstock……………………….21
Master Quick Change Feed Box………23
Master Saddle……………………25
Dominion Quick Change Feedbox……..27
Dominion Saddle………………….29
Apron…………………………..31
Bed…………………………….31
Tailstock……………………….33
Square Tool post…………………33
Taper Turner…………………….35
Stationary Steady………………..35
Mechanical Clutch………………..35
Electrical Equipment……………..36
Chuck Spares…………………….36
Service Hints……………………37
Overview
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page,and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear; they are then comb bound with heavy cover pages so they lie flat on the workbench.
