OKAMOTO 612, 618 Surface Grinder Operator Part Manual

Description

Number of Pages: 63

This is a reproduction, not a photocopy, of an original Okamoto 612 & 618 Surface Grinder Operator’s and Parts Manual. This manual contains information on set up, lubrication, maintenance, adjustments and controls as well as a complete parts list and diagrams.

Contents:

General Description...................................5-10

Principal Parts of the Machine.........................5-6

Specifications...........................................7

Working Range of 612 & 618...............................8

Outside Dimensions of 612................................9

Outside Dimensions of 618...............................10

Installation.........................................11-17

Locating the Machine....................................11

Lifting the Machine.....................................11

Shipping Clamps.........................................12

Cleaning the Machine....................................12

Mounting the Table and Ball Retainers on Machine.....12,15

Levelling the Machine...................................15

Lubrication.............................................15

Power Supply Connection..............................15,17

Operation of the Machine.............................18-24

Operation of the Handwheels.............................18

Table Clamp.............................................18

Saddle Clamp............................................19

Table Dogs and Stopper..................................19

Inclinable Wheel Guard..................................19

Operator's Check Before Running.........................19

Mounting a Grinding Wheel on the Adaptor.............19,23

Removing the Wheel Unit from the Spindle................23

Truing the Grinding Wheel............................23-24

Regrinding the Magnetic Chuck...........................24

Maintenance..........................................25-29

Cleaning the Table Ways.................................25

Replacement of the Wire Rope for Table Drive............25

Replacement of the Wheel Spindle Unit...................25

Disposition of Waste Lubrication Oil ...................25

Replacement of Woolen Oil Wicks ........................28

Parts List...........................................31-63

Linear 612...........................................31-46

Linear 618...........................................47-63 

Overview

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear; they are then comb bound with heavy cover pages so they lie flat on the workbench.