HARDINGE AHC Chucking Machine Operator Manual

Description

Number of Pages: 24

This is a reproduction, not a photocopy, of an original Hardinge AHC Automatic Chucking Machine Operator’s Manual. This manual contains information about operating instructions, adjustments, troubleshooting and a complete set of exploded view diagrams of the parts. See index below.

 

 

Index

Air Connection……………………………………2
Carriage, Feed Rate……………………………….8
Programmer……………………………………….9
Relocation On Bed…………………………………9
Stops……………………………………………8
Cleaning Machine………………………………….2
Collet Closer, Adjustment………………………….6
Operation………………………………………..5
Removal………………………………………….6
Replacement………………………………………6
Coolant Facilities………………………………..4
Cross Slide Feed Rate…………………………..8,11
Stops……………………………………………8
Dwell……………………………………………8
Electrical Connections…………………………….3
Floor Plan, Machine………………………………16
Foundation, Machine……………………………….2
Hydraulic System, Bleeding of Lines…………………4
To Fill Reservoir…………………………………2
Installation, Machine……………………………..2
Leveling, Machine…………………………………2
Lubrication………………………………………4
Manual Operation and Machine Setup………………….7
Programming Functions…………………………….10
Carriage with Vertical Slide………………………11
Chase Thread…………………………………….10
Cross Slide Feed…………………………………11
Cross Slide First—Cross Slide Hold…………………11
Deep Hole Drill………………………………….13
Feed Stock………………………………………10
Jack………………………………………….. 11
Low Pulley—Low Clutch…………………………….11
Rapid Return…………………………………….11
Skip Station…………………………………….10
Stop Cycle………………………………………10
Tap…………………………………………….13
Vertical  Slide………………………………….10
Programming Paths………………………………..12
Serial Number…………………………………….5
Spindle—Brake…………………………………….8
Drive Unit……………………………………….7
Free…………………………………………….4
Lock Pin…………………………………………4
Stop Button, Master……………………………….5
Tooling (Optional)…………………………….14,16
Bar Feeds……………………………………….23
Cut-Off Tool Holder………………………………14
Headstock Spindle Tooling…………………………16
Part Chute………………………………………14
Turret Tooling…………………………………..18
Tooling Dimensions……………………………….15

 

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.