Over a 1,000 different machine manuals and books available
Over a 1,000 different machine manuals and books available

Metal Lathe 13×25 13×36 13×40 Manual JET, Enco, Grizzly

Id: 0773

$35.00

Clear
Click Here to Pay by Check/Money Order
Print Page

Description

Number of Pages: 63


This is a reproduction, not a photocopy, of a Asian 13×25 13×36 13×40 Metal Lathe Instructions and Parts Manual. This machine is manufactured in Asia and has been sold under many different names including: JET, Grizzly, Enco, MSC, etc… This manual contains information on setup, lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments. For an Asian manual this is put together well, and it covers a lot more than usual.

Known Models:

BD-1325R

BD-1336R

BD-1340R

Paykel Engineering, TY-1340BH

 
PDF Download is Available

The manual has the option for either a PDF Download or a quality Printed copy with card stock covers and a comb binding. After purchase an email will be sent with link to download the PDF. The PDF will not be password protected, but your contact information will be watermarked at the bottom of the pages.

 

Specifications:

Capacity & Dimensions     

Swing

Over bed……………………………………………………………330mm(13″)

Over cross slide…………………………………………………..198mm(7-25/32″)

In gap Diameter (optional)……………………………………..476mm(18-3/4″)

Length (optional)…………………………………………………146mm(5-3/4″min.)

Center  

Height………………………………………………………………..166mm(61/2”)

Admits between         (BD-1325R)…………………………628mm(24-23/32″)

                                   (BD-1336R)………………………..915nm(36″)

                                  (BD-134OR)………………………..1035rrm(40-3/4″)

 

Bed     Width………………………………………………………187mm(7-3/8″)

            Length (BD-1325R)………………………………….1248mm(49-l/8″)

                        (CBD-1336R)……………………………….1535rrm(60-3/8″)

                        (BD-1340R)………………………………….1655mm(65-l/8″)

Height………………………………………………………………..290mm(ll-13/32″)

 

Drive…………………………………………………………Motor via belts & pulley

Motor    For main spindle………………………………………2HP, 3ph or

                                                                                    2HP, or lHP, lph

Headstock                                         

Spindle   Bore…………………………………………………….39mm(l-17/32″)

Nose………………………………………………………………….A.S.A. M. TYPE, 21/4”-8 T.P.I.

       or (optional)………………………………………………….Dl-4″ ASA std.

Taper in nose……………………………………………………….No.5 Morse

          in sleeve……………………………………………………..No.3 Morse

Speeds    Number…………………………………………………12

               Range…………………………………………………..60-1240 r.p.m.

 

Carriage & Compound

 

Cross slide  Width………………………………………………..118mm(4-5/8″)

                   Travel ………………………………………………160mm(6-5/16″)

Compound rest Width…………………………………………..76mm(3″)

                         Travel…………………………………………..68mm (2-11/16″)

Lead screw   Diameter…………………………………………..22mm(7/8″)

                     Thread……………………………………………..8 T.P.I, or 3mm pitch

Feed rod    Diameter…………………………………………….19mm(3/4″)

 

Tailstock Quill

Taper………………………………………………………………….No.2 Morse

or  (optional)………………………………………………………..No.3 Morse

Contents:

Overall measurement……………………………………3

Brief specification………………………………………..4

Standard accessories…………………………………..5

II. MACHINE ASSEMBLY………………………..6

III. INSTALLATION…………………………………7

Unloading………………………………………………….7

Cleaning……………………………………………………7

Setting up the machine………………………………….7

Electrical supply………………………………………….8

IV. LUBRICATION SYSTEM…………………….8

Lubrication checks………………………………………8

Lubrication charts……………………………………..10

V. OPERATION……………………………………..14

Symbols for operation………………………………..14

Operating diagram……………………………………..15

Electrical control & operation………………………16

Spindle speed control…………………………………16

Head stock spindle driver……………………………17

Spindle nose (Cam Lock Dl-4″)…………………..18

Feed and thread selection……………………………19

Thread dial indicator…………………………………..25

Cross slide and compound rest…………………….27

Tailstock………………………………………………….27

VI. LATHE ALIGNMENT………………………..27

VII. MAINTENANCE………………………………28

Electrical 1 wiring diagram…………………………..31

VIII. PARTS SECTION……………………………35

Head stock………………………………………………37

Gear box………………………………………………….42

Carriage…………………………………………………..44

Apron……………………………………………………..48

Tailstock………………………………………………….52

Tailstock (Optional)……………………………………54

Bed ass’y(Bed, Chip tray and Stand)……………..56

Bed ass’y (Change gears and guard)………………58

Bed ass’y(Third rod for spindle control)………….60

Motor drive………………………………………………62

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.

Reviews

There are no reviews yet!

Be the first to write a review

*

We do more than sell manuals.


raymillworkshopshopadshopmattmill
 

We are a father and son team that operate a 5,000 sq/ft metal machine and wood shop. We've had to design our own machines (including CNC), and fixtures for our wood working. We make some of the smallest most precise inlay in the world. We maintain tolerances of 0.0005" in a 12" strip of wood, and we have duck calls with over 1,100 pieces of wood in them.


lduckcalls17


We've collected various machines and accumulated lots of manuals over the years, and we like to help keep these old machines running. Some of the manuals on this site are from machines in our shop like the Rockwell 10" unisaw, Rockwell uniplane, Walker Turner 1100 16" band saw, etc.. Check out our About Us page, and feel free to Contact Us with any questions. Our main site is Ozarkwoodworker.com. We plan to offer more products in the future. Check out our Ozark Shop Talk Blog.
We offer free domestic shipping, and upgrades to express methods. We ship every business day. International shipping is available. We offer First Class and Priority Flat Rate. Shipping cost should be calculated automatically during checkout.

Categories

Top