Over a 1,000 different machine manuals and books available
Over a 1,000 different machine manuals and books available

Metal Lathe 10″ x 24″-12″ x 36″ Manual-Jet,Enco,Grizzly,MSC,Asian

Id: 0770

$35.00

40 in stock




Description

Number of Pages: 50

This is a reproduction of an original Asian Metal Lathe 10″x 24″ and 12″x36″ Instructions and Parts Manual. This machine is manufactured in Asia and has been sold under many different names including: JET, Grizzly, Enco, MSC, etc… This manual contains information on setup, lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments.

Known models covered:

ENCO 92010

JET-1024P

JET-1236P

Acraturn TT-1236G

Frejoth F-900 12X36

Picture:

Specifications:

Contents:

INTRODUCTION……………………………….1

DESCRIPTION AND SPECIFICATIONS……………….1

INSTALLATION……………………………….3

Unpacking and Cleanup……………………….3

Foundation Preparation and Mounting…………..3

Leveling…………………………………..3

Electrical Hookup…………………………..4

Preoperation Servicing and Checks…………….5

Servicing………………………………….5

Rotation Check……………………………..5

OPERATION………………………………….5

Do’s and Don’ts…………………………….5

Controls…………………………………..6

Headstock………………………………….6

Carriage…………………………………..6

Tailstock………………………………….6

Lathe Setup Procedures………………………9

Headstock………………………………….9

Chuck and Faceplate Installation……………..9

Chuck and Faceplate Removal………………….9

Selecting Spindle Speeds…………………….9

Engaging the Back Gear………………………9

Disengaging the Back Gear……………………9

Changing Pulley Ratios……………………..10

Feed and Thread Selection…………………..10

Conversion to Metric Gears in Quick Change

Gearbox…………………………………..10

Carriage………………………………….11

Installing Tools…………………………..11

Positioning the Tool Post…………………..11

Cutoffs and Facing…………………………11

Longitudinal Cuts………………………….11

Threading…………………………………12

Tailstock…………………………………12

Steady Rest Installation……………………12

LUBRICATION AND ADJUSTMENT………………….12

Lubrication……………………………….12

Adjustment………………………………..12

V-Belt Tension Adjustment…………………..12

Carriage Bearing Plate Adjustment……………13

Cross Slide Gib Adjustment………………….13

Tool Post Slide Gib Adjustment………………13

Compound and Cross Feed Handwheel Adjustment….13

Tailstock Adjustment……………………….13

PARTS LIST……………………………..14-50



 

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.

 

Reviews

There are no reviews yet!

Be the first to write a review

*

We do more than sell manuals.


raymillworkshopshopadshopmattmill
 

We are a father and son team that operate a 5,000 sq/ft metal machine and wood shop. We've had to design our own machines (including CNC), and fixtures for our wood working. We make some of the smallest most precise inlay in the world. We maintain tolerances of 0.0005" in a 12" strip of wood, and we have duck calls with over 1,100 pieces of wood in them.


lduckcalls17


We've collected various machines and accumulated lots of manuals over the years, and we like to help keep these old machines running. Some of the manuals on this site are from machines in our shop like the Rockwell 10" unisaw, Rockwell uniplane, Walker Turner 1100 16" band saw, etc.. Check out our About Us page, and feel free to Contact Us with any questions. Our main site is Ozarkwoodworker.com. We plan to offer more products in the future. Check out our Ozark Shop Talk Blog.
We offer free domestic shipping, and upgrades to express methods. We ship every business day. International shipping is available. We offer First Class and Priority Flat Rate. Shipping cost should be calculated automatically during checkout.

Categories

Top